Slingshots Forum banner
hrawkeye
1-16 of 16 Results
  1. Homemade Slingshots
    A few of you might remember a few days back I made an Aluminium Wrench with a green core for another member. I was so pleased with the result that I found it hard to let go, so only one thing to do. Hit the workshop and make another. This time I went for a Neon Green core for that bit of extra...
  2. Forkeye MK2

    I've extended the forks and made adjustments to the band grooves and some minor changes here and there. The one on the right with the redhead is going to Hrawk, the one of the left is still unfinished and will be my daily shooter (once I find my bigger spade bit and fix the hole that I drilled
  3. Homemade Slingshots
    Hey guys, Just thought i'd post my latest catapult. It's a aluminium hrawkeye with extended forks as for me the fork tips were just a little to thin (personal preference) banded with double red asda bands (cheap) It didn't take long to make, just something that is strong and durable. I chose...
  4. Laminated Acrylic Hrawkeye

    Three layer acrylic Hrawkeye. Red core with smoke front and back. Made for Secret Santa and sent to Henry.
  5. Laminated Acrylic Hrawkeye

    Three layer acrylic Hrawkeye. Red core with smoke front and back. Made for Secret Santa and sent to Henry.
  6. Laminated Acrylic Hrawkeye

    Three layer acrylic Hrawkeye. Red core with smoke front and back. Made for Secret Santa and sent to Henry.
  7. Laminated Acrylic Hrawkeye

    Three layer acrylic Hrawkeye. Red core with smoke front and back. Made for Secret Santa and sent to Henry.
  8. Laminated Acrylic Hrawkeye

    Three layer acrylic Hrawkeye. Red core with smoke front and back. Made for Secret Santa and sent to Henry.
  9. Laminated Acrylic Hrawkeye

    Three layer acrylic Hrawkeye. Red core with smoke front and back. Made for Secret Santa and sent to Henry.
  10. Laminated Acrylic Hrawkeye

    Three layer acrylic Hrawkeye. Red core with smoke front and back. Made for Secret Santa and sent to Henry.
  11. Homemade Slingshots
    Hello! Just wanted to show you guys a project I have been working on the last two months......I give you the Titanium Hrawkeye! It is based off of Hrawk's "Hrawkeye" (how'd you guess!?) and I was given permission by Mr. Hrawk himself to use it! It is made from Grade 2 commercially pure titanium...
  12. Hrawkeye

    Grey Ironbark frame wearing single 1745 tubes and a roo leather pouch attached using the cuff method
  13. Homemade Slingshots
    Well as a lot of you are aware I picked up a whole bunch of new timber the other day, all Australian natives except for one. LINK A few of the different types had already been cut and dressed for use as floor boards and decking material, 20x85mm, so I set about creating a new design to make the...
  14. Template finished, blanks cut

    Finished up the template and smoothed it all over. Cut up the Grey Ironbark into blanks ready to start cutting out frames with the router.
  15. Making a template for new design

    Making a template for new design 3mm 6061 plate "The Hrawkeye"
  16. Making a template for new design

    Making a template for new design 3mm 6061 plate "The Hrawkeye"
1-16 of 16 Results
Top