Joined
·
6,283 Posts
Do not use the gold crepe. They are very slow. Now I have to get more 107's as I have never tried the sterling
What so you don't have questions over there?What the heck are you talking about slignshot_sniper? I dont live in england. I have no clue where to get them over there? Why would we?
What so you don't have questions over there?What the heck are you talking about slignshot_sniper? I dont live in england. I have no clue where to get them over there? Why would we?
That is a great tip. Thanks for sharing.A tip for using 107s:
Stretching them out several times before you cut them has two benifits, it cuts down on break in time for the bands and it makes it easier to see the "joint" in the band where the flat strip was connected in to a loop. All bands have this and it's very benificial to band life and consistency to cut on this joint when you make these bands.
Hi NaturalFork,Tested 107 bands this morning. I think they may be ok for larger ammo but they are very very slow when shooting 3/8 inch steel. Too slow even to target shoot with (you know I like distance shots) and for the draw weight they are simply not viable for me. I do like the fact that they are made in the USA.
I am pretty sure I was getting poor performance or a perceived poor performance for a couple reasons. First I think my regular configuration is just a pretty fast one and I am not used to the drop in speed. Another is when I was first testing my pouch ties were very heavy. I since moved to zip ties and the performance seems to have improved. I made a video and posted the results in another thread. Should have put in this one really. Here is the video. All in all these are pretty decent bands.I'm curious. Considering the number of shooters who have reported good results, and my own tests with Sterlings, your reported poor performance has me wondering. I'm not questioning your results, but it seems to me there may be something wrong with your setup, and I'd like to help you resolve it.
What is the relaxed frame to pouch measurement? Most seem to prefer 8 inches.
What is your draw length? Those who reported short draw lengths got better results when they shortened the bands. I pull about 34 inches.
Pouch weight? This doesn't seem to be critical. I get similar performance with Jim Harris' lightweights or my heavier home mades.
Temperature? I have no idea how these bands will perform in cold weather, because we don't get any.
I don't have any problems shredding steel soup cans from 10 yards with these bands using .375 lead balls, though .429 lead will make the job easier. I don't have any 3/8 steel, but I measured .25 steel at over 200 fps and 3/8 lead at ~170 fps. .25 steel zips through both sides of a suspended aluminum can. The only ammo that doesn't penetrate a suspended aluminum can well is .50 lead, which tends to flatten it.
Here are a few of my targets that have been shot with 107s.
I also like the 107s a lot. But ... i think I will stick with using my normal flats simply for the speed. Oh and the regular TBG or equiv pull much lighter than 107s too.I put on a set of 1842 tubes today and they're sooooo much faster. As they should be since they pull quite a bit harder.
I'm still a fan of 107s though.