Slingshots Forum banner

Anatomy of a band break

1319 Views 6 Replies 3 Participants Last post by  CataDave
I broke a band on the 4th slingshot in three days. I expected this, as all four were in the 700 to 800 plus shot range. All four broke within 1/8th inch of the pouch tie, on the inside band. Obviously, that's the stress point in my shooting. I have an idea that someone else mentioned here in the past. Instead of retying or gluing the ends back together, I'm going to place the bands through the pouch, in the normal manner, but then fold them over and glue them together
351331
with superglue. The glue should hold fine, as I'm gluing flat surfaces together and not the butted edges like I do when I'm gluing a break back together. That should reduce stress on the band and allow for improved band life. I'll test it on one slingshot and report.

Joe
See less See more
  • Like
Reactions: 4
1 - 2 of 7 Posts
I would really hesitate to use super glue on that side of a band. Dried cyanoacrylate is very hard and creates sharp edges. If the band breaks again in the same spot or past that point, it could harm you much worse than the band alone. Especially if it hits your face. I would use latex-based glue like Copydex if anything.

Sorry, wrong thread. There were many similar threads lately. I wanted to reply to this one instead:
  • Like
Reactions: 1
The reason it can't harm the shooter is if the band breaks at the fork tip, it can fly back at the shooter, but there's no glue on that end. If it breaks anywhere at the pouch end, where there is hard glue, it flies away from the face.

Joe
Yes, I wanted to reply to another thread as it is mentioned. On the other hand, a hand-hit could be hurting too. Way less than the other way, of course. Still, I would not put anything hard and/or sharp on my bands. Just my personal opinion. Whatever floats your boat.

Anyway, I must admit that I find it pretty amazing that it is even possible to glue latex bands with cyanoacrylate and it apparently works. Good to know.
  • Like
Reactions: 1
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top