Sorry, can't make braced slingshots. Totally outlawed. No licenses available.
The slingshot in the picture looks cool, but is probably very heavy and most likely a poor performer, using thick tubular rubber.
Designs like this one are easy if you have a water cutter (flow jet), you just program the shape into the CAM and then the machine will cut it out of an aluminum board within minutes. Without a flow jet, lots of work.
Regards
Jörg
The slingshot in the picture looks cool, but is probably very heavy and most likely a poor performer, using thick tubular rubber.
Designs like this one are easy if you have a water cutter (flow jet), you just program the shape into the CAM and then the machine will cut it out of an aluminum board within minutes. Without a flow jet, lots of work.
Regards
Jörg
