Slingshots Forum banner
1 - 1 of 1 Posts

· Registered
350 Posts
Needs a proper burial or may be just epoxy it back using a 2 part metal filled epoxy paste like XF753. I'd drill a few holes in both directions insert epoxy followed by two metal rods/pins (nails) epoxy the heck out of it. Can be sanded down later. I would try to CPR first before burying it.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.