Slingshots Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
3,545 Posts
Discussion Starter · #1 ·
I'm happy with TBG but itching to try something else. Those of you regularly using GZK, USOPP, BSB, Precise, etc. with 3/8 steel, please let me know which brand and size. Leaning towards Gen 3 Precise .65 and want to see how close I am to making a good choice! Thanks!
 

·
Neophyte
Joined
·
2,252 Posts
Lately I have been using 1/2 inch straight cut .70 / .75 from a few different makers for 3/8 ammo. In my opinion you end up with about the same amount of latex in total and I like the feel of the 1/2" cut. To me it is easier to draw but still fast and snappy. Also with it being a straight cut I can trim it easily where as a taper would change the taper with trimming.
 
  • Like
Reactions: StringSlap

·
Registered
Joined
·
3,545 Posts
Discussion Starter · #6 ·
Lately I have been using 1/2 inch straight cut .70 / .75 from a few different makers for 3/8 ammo. In my opinion you end up with about the same amount of latex in total and I like the feel of the 1/2" cut. To me it is easier to draw but still fast and snappy. Also with it being a straight cut I can trim it easily where as a taper would change the taper with trimming.
Funny, but on a whim last night I cut 1/2" TBG bands. They were working very well with 3/8.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top