Yup I learned that the insert strips out really easily. One hole was just a touch too shallow. Figured I could just give it that extra little bit I needed to get it flush, but ended up spinning the hex key. It sits proud a hair. I could file it but don't want to risk damaging the finish. Works fine the way it is.Yup. That is a great modification. I made a mistake on a similar project by adding a few drops of Stupid Glue right before I screwed in the inserts. The glue and friction stopped the process and I stripped out the insert before I was able to bury it. The next time will be either no glue or slow glue.