Slingshots Forum banner
1 - 15 of 15 Posts

·
Slingshot Warrior
Joined
·
1,306 Posts
Discussion Starter · #1 ·
I've recently done a 7 part video tutorial on how I make my scrapper frames and I go into it step by step. From the materials I use and how I put them together and if you're a slingshot maker you may like this tutorial series or not depending on your taste but either way. ENJOY https://www.youtube.com/watch?v=ol0MJXGz9wY #1 https://www.youtube.com/watch?v=vIUs8vyiHtE&t=11s #2 https://www.youtube.com/watch?v=Jwe_Bigi-0s #3 https://www.youtube.com/watch?v=8W-5ZDv17Q4 #4 https://www.youtube.com/watch?v=yhYtMoFbymY&t=1s #5 https://www.youtube.com/watch?v=Y_08ieBYZ-o #6 https://www.youtube.com/watch?v=D7xds66JIj4&t=8s #7
 

Attachments

·
Prince of Paraprosdokians and Epistemophilia
Joined
·
2,565 Posts
  • Like
Reactions: MakoPat

·
Prince of Paraprosdokians and Epistemophilia
Joined
·
2,565 Posts

·
Premium Member
Joined
·
3,288 Posts
I always coffee before communication. Even still I am a day late again. Haha...
I am big fan of your makery, Crypter. I do wood mostly. And lately some aluminium... still getting a feel for that.

What I like is you keep that classic Y shape. I am dedicated to these pfs's for a while... until I get my first ISCOR rank. Then I am definitwly goimg to try this.
 

·
Registered
Joined
·
4,105 Posts
I've recently done a 7 part video tutorial on how I make my scrapper frames and I go into it step by step. From the materials I use and how I put them together and if you're a slingshot maker you may like this tutorial series or not depending on your taste but either way. ENJOY https://www.youtube.com/watch?v=ol0MJXGz9wY #1 https://www.youtube.com/watch?v=vIUs8vyiHtE&t=11s #2 https://www.youtube.com/watch?v=Jwe_Bigi-0s #3 https://www.youtube.com/watch?v=8W-5ZDv17Q4 #4 https://www.youtube.com/watch?v=yhYtMoFbymY&t=1s #5 https://www.youtube.com/watch?v=Y_08ieBYZ-o #6 https://www.youtube.com/watch?v=D7xds66JIj4&t=8s #7
I remember when you first shows this technique mate, definitely unique I made one at work one afternoon when I was a mover with stuff that was in the truck lol! We did a move between two towns sp I had about 45 mins on the road and I knocked out a little one with some chained elastics and a duct tape pouch. Left it in the truck nd we shot loose hex nuts with it when we were stopped at places for food or at the shop lol.

...I wonder if its still there, it was a decent little beater for being made in a moving truck haha.

Sent using two thumbs and Tapatalk.
 
  • Like
Reactions: MakoPat

·
Slingshot Warrior
Joined
·
1,306 Posts
Discussion Starter · #9 ·

·
Slingshot Warrior
Joined
·
1,306 Posts
Discussion Starter · #11 ·
I always coffee before communication. Even still I am a day late again. Haha...
I am big fan of your makery, Crypter. I do wood mostly. And lately some aluminium... still getting a feel for that.

What I like is you keep that classic Y shape. I am dedicated to these pfs's for a while... until I get my first ISCOR rank. Then I am definitwly goimg to try this.
I'm glad I have a fan bro, and I look forward to seeing your version of a scrapper frame. I've been to been told on youtube that my frames have a unique style that's easy to spot. :king: :D :)
 

·
Slingshot Warrior
Joined
·
1,306 Posts
Discussion Starter · #12 ·
I've recently done a 7 part video tutorial on how I make my scrapper frames and I go into it step by step. From the materials I use and how I put them together and if you're a slingshot maker you may like this tutorial series or not depending on your taste but either way. ENJOY https://www.youtube.com/watch?v=ol0MJXGz9wY #1 https://www.youtube.com/watch?v=vIUs8vyiHtE&t=11s #2 https://www.youtube.com/watch?v=Jwe_Bigi-0s #3 https://www.youtube.com/watch?v=8W-5ZDv17Q4 #4 https://www.youtube.com/watch?v=yhYtMoFbymY&t=1s #5 https://www.youtube.com/watch?v=Y_08ieBYZ-o #6 https://www.youtube.com/watch?v=D7xds66JIj4&t=8s #7
I remember when you first shows this technique mate, definitely unique I made one at work one afternoon when I was a mover with stuff that was in the truck lol! We did a move between two towns sp I had about 45 mins on the road and I knocked out a little one with some chained elastics and a duct tape pouch. Left it in the truck nd we shot loose hex nuts with it when we were stopped at places for food or at the shop lol.

...I wonder if its still there, it was a decent little beater for being made in a moving truck haha.

Sent using two thumbs and Tapatalk.
thanks, bro awesome :banana: :banana: :headbang: :headbang:
 

·
Prince of Paraprosdokians and Epistemophilia
Joined
·
2,565 Posts
I guess nobody wants to comment? :iono: :iono: :iono:
We're not awake yet...
I understand, but I've been waiting for 2 days for someone to comment LOL. :rolling: :rolling: :rolling:
Be patient - slingshots weren't built in a day.

So true LOL! :king:

...whoops, forget about it, that was "Rome". Wikipedia says so.
Well then, you've received responses, as I suggested you would. Sometimes you just need to wait for folks to come out of hibernation, or the Cherokee nation, then see your post, formulate their response, and type it out.

Basically, there are so very many forums, and very many posts (and wonderful guys) in the SlingshotForum.com. A little patience is required after making a post.
 

·
Slingshot Warrior
Joined
·
1,306 Posts
Discussion Starter · #14 ·
I guess nobody wants to comment? :iono: :iono: :iono:
We're not awake yet...
I understand, but I've been waiting for 2 days for someone to comment LOL. :rolling: :rolling: :rolling:
Be patient - slingshots weren't built in a day.

So true LOL! :king:

...whoops, forget about it, that was "Rome". Wikipedia says so.
Well then, you've received responses, as I suggested you would. Sometimes you just need to wait for folks to come out of hibernation, or the Cherokee nation, then see your post, formulate their response, and type it out.

Basically, there are so very many forums, and very many posts (and wonderful guys) in the SlingshotForum.com. A little patience is required after making a post.
I agree I guess a watched pot never boils.
 

·
Slingshot Warrior
Joined
·
1,306 Posts
Discussion Starter · #15 ·
I've recently done a 7 part video tutorial on how I make my scrapper frames and I go into it step by step. From the materials I use and how I put them together and if you're a slingshot maker you may like this tutorial series or not depending on your taste but either way. ENJOY https://www.youtube.com/watch?v=ol0MJXGz9wY #1 https://www.youtube.com/watch?v=vIUs8vyiHtE&t=11s #2 https://www.youtube.com/watch?v=Jwe_Bigi-0s #3 https://www.youtube.com/watch?v=8W-5ZDv17Q4 #4 https://www.youtube.com/watch?v=yhYtMoFbymY&t=1s #5 https://www.youtube.com/watch?v=Y_08ieBYZ-o #6 https://www.youtube.com/watch?v=D7xds66JIj4&t=8s #7
I remember when you first shows this technique mate, definitely unique I made one at work one afternoon when I was a mover with stuff that was in the truck lol! We did a move between two towns sp I had about 45 mins on the road and I knocked out a little one with some chained elastics and a duct tape pouch. Left it in the truck nd we shot loose hex nuts with it when we were stopped at places for food or at the shop lol.

...I wonder if its still there, it was a decent little beater for being made in a moving truck haha.

Sent using two thumbs and Tapatalk.
Was it exactly how I made mine?
 
1 - 15 of 15 Posts
Top