[KX4SAM]

I have a small diameter natural frame. The forks are about 3/8 in diameter.

How can I attached tubes either single or looped to that fork?

 

[Winnie]

I never shoot tubes but the principal is the same. It is very common for me because I shoot small frames to fold my bands in half and then tie them on. My bands are always wider than the forks they are mounted on. Tubes don’t fold easily but so long as the frame is not narrower than the tube then simply tying it on should be fine.

 

[SLINGDUDE]

Leather or microfibre tabs will accommodate loops or singles.

 

[KX4SAM]

Small pouch would work?

 

[SLINGDUDE]

As long as it's matched to the ammo, sure.

 

[Winnie]

Cup your pouch using a steel ball and the flame from a lighter. I commonly shoot 7/16 using a narrow synthetic pouch by cupping it.

 

[Reed Lukens]

Small pouch would work?

Yes, you should be able to cut one in half to tie on both forks, leaving the pouch hole on each end to tie into

 

[SLINGDUDE]

Small pouch would work?

Oh for the tabs. Yes, pouches work great.

 

[Stankard757]

Or you can also just fold the pouches in half wrap and tuck

Or gypsy tabs

Sensitive content, not recommended for those under 18

Show Content

Apologize for the pics literally threw these together to show

Sent from my LG-TP260 using Tapatalk

 

[KX4SAM]

Thanks!

Sent from my iPad using Tapatalk

 

[flipgun]

That is just the size fork I like to use to make Whishbones. I use single sided tabs cut long and shoot singles. I punch the tabs and when I put them on the frame I wrap a rubber band around them to hold them in place while I position them. I pull the tabs up so that the bottom of the hole is even with the side of the fork facing me and secure. Wrap and tuck will work fine for that

If you wish to stick with loops, You can punch the tab and split them from the bottom and proceed as above.

 

[Winnie]

Flipgun, Those tabs really do make sense. I’ve got a question for you. Do they lessen the tendency towards handslap? It would seem that if the band isn’t bending over the top of your fork but, instead, pulling straight back that it might not whip over the fork.

 

[flipgun]

They do unless I under load like 1/4" with 1745's. I was sure I had sent you one of these. I'll have to fix that.

 

[craigbutnotreally]

Or you can also just fold the pouches in half wrap and tuck

Or gypsy tabs

Sensitive content, not recommended for those under 18

Show Content

Apologize for the pics literally threw these together to show

Sent from my LG-TP260 using Tapatalk

Oooooo. Hadn't thought of that. Looks nice for pseudos or looped. Thanks for the pics.

Sent from my iPhone using Tapatalk

 

[SJAaz]

I'm with those guys. Use some type of tab, use your creativity!

 

[KX4SAM]

Ok, first revision is tied. I'll shoot it tomorrow

Sent from my iPad using Tapatalk

 

[Stankard757]

Nice, Sammy

Sent from my LG-TP260 using Tapatalk

 

[flipgun]

That'll work! Finger braced of course.

 

[KX4SAM]

It worked AWESOME. Find my aim point and split a can.

Sent from my iPad using Tapatalk

 

[Stankard757]

Glad it works for ya, Sammy

Sent from my LG-TP260 using Tapatalk