Slingshots Forum banner
1 - 3 of 3 Posts

535 Posts
Discussion Starter · #1 ·
Hello everyone hope everyone has had a good New year's so far :)
I had a quick question of what band thickness is the most versatile too use for 9.5mm too 11mm steal and a short anchor point draw?
And what bands do you use to what taper or straight and ammo.
Thanks in advance :)

Sent from my SM-G960U using Tapatalk

Ray Rowden
3,131 Posts
If you cut it yourself, all latex flats are versatile.

I use a lot of the old style SS Black that I bought on clearance when SS was bringing in the new formulation.

I use 1/4-inch straights for .177, 1/4-inch, and 5/16 -inch steel.

I like 1/4 to 1/2 inch tapers 12 inches long for 3/8-inch steel and marbles at butterfly draw.

I like 3/4 to 3/8-inch (6/8 to 3/8 in my head) tapers at 10 inches for 3/8-inch steel and marbles at a shorter draw.

Seems like any flats could be cut to suit in a similar fashion, although the dimensions would vary.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.