Slingshots Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
1,864 Posts
I like running my spinners through rabbit snare wire, myself....they spin really well...but I think I'm gonna try this and the snare wire...should spin like a fidget

Sent from my B3-A40 using Tapatalk
 

·
Registered
Joined
·
605 Posts
Discussion Starter · #14 ·
I'm going to set this up this weekend and see if it works out. My first concern is that the spinner will simply get shot off the spring. It seems sturdy and secure but you never know until it takes some hits. Also repeated hits to the spring itself could deform the spring making it unspinnable or unable to hold the spinner. Going to try this on gutted 550 cord (pictured) and on 12 gauge wire. Not sure if intact 550 cord can fit through the spring - I'll check. Clothespins are cheap so this experiment won't cost me much it it doesn't work out. Thanks for the input all.
 

·
Registered
Joined
·
1,303 Posts
Yes what may happen is if you hit the spring the force may bend the spring to the point it will be hard to get it off the string and stop it from spinning possibly.
 
1 - 20 of 20 Posts
Top