Joined
·
1,558 Posts
Hey folks! Here's a quick little shooter I made a few night ago. Had a nice thin piece of osage and found a small piece of clear polycarbonate. I bonded the sections with super glue. Next I cut out a design on a band saw. I used a router to round over the edges. I sanded the whole shooter to 320 grit and then went over the surface with scotch brite. Finally, a finish of automotive clear coat was applied. I'm pretty happy with how it turned out. Thanks for looking!
Attachments
-
120.3 KB Views: 38
-
126.5 KB Views: 32
-
105.9 KB Views: 36
-
108.2 KB Views: 35
-
130.1 KB Views: 32