Slingshots Forum banner
1 - 4 of 4 Posts

·
Super Moderator
Joined
·
1,874 Posts
So I have been shooting a lot of paper lately. I ended up making a .pdf file with targets on it, both for 10 meter and combined 20+ and 10 meter targets.

When printed on an 8.5x11 sheet of paper these should print the 10 meter rings as 2.06" (2 and 1/16", just under the 2 and 1/8 that my old caliper says a soda can lip is). The 20 meter ring should print as 3.31" or 3 and 5/16", or what my old caliper gets for a 5 oz. tuna can. Both have 3/4" red bullseye's in the middle.

I made sets with and without cross hairs.

The targets are spaced out far enough to (hopefully) be able to hang a single sheet with multiple targets. Of course, they can be cut apart and mounted separately as well.

I have been printing on photo paper and find they are stiff enough to hang and shoot as is that way. I have also been printing on regular paper and mounting on cardboard using double sided tape.

This has been useful for me, hopefully some others will find useful as well. I also hope they print accurately for others, and thanks in advance for anyone who lets me know if they do or do not.

HDF
 

Attachments

·
Super Moderator
Joined
·
1,874 Posts
Discussion Starter · #5 ·
The paper isn't nearly as much fun as whapping spinners, bashing cans, and so many other fun targets. But I found it helped me a lot. My eyes tend to fool me into thinking my misses were closer than they were with other targets. But the paper is brutally honest. And while sometimes deflating it has helped me a lot.
 

·
Super Moderator
Joined
·
1,874 Posts
Discussion Starter · #11 ·
Shooting paper may not be the funnest, but is really helpful. My eyes often lie to me about how close the misses were, but the paper is brutally honest with that.

Attaching the files (.pdf works for many) is a convenient way to share the targets. I think there is also a file upload / template section here.

Lots of great people sharing lots of great things, part of what makes this forum so good.

Cheers!

HDF
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top