Slingshots Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
194 Posts
This is a great idea! I'm wondering if something similar could be done with 'snaps' those little paper twists that explode when thrown - a few of them suspended would make a great visual target if it works!
 

·
See The Target
Joined
·
21,698 Posts
Yes. i'm thinking one of the snaps could be placed in the end of a small plastic coffee stirrer and then held in place with a clamp .A good ammo strike would have to pop it. I'm going to try it.
 

·
Banned
Joined
·
6,402 Posts
If you want a nice small target, get some of the round caps.

Get some nails with round heads that fit snugly into the caps, hammer into a board, put the caps on and shoot away.

This will give you about a 4mm target to aim at and hit.

 

·
Premium Member
Joined
·
714 Posts
If you want a nice small target, get some of the round caps.

Get some nails with round heads that fit snugly into the caps, hammer into a board, put the caps on and shoot away.

This will give you about a 4mm target to aim at and hit.

how i never though of this I will never know
 

·
Premium Member
Joined
·
3,465 Posts
These caps can be put on the back of a round bullseye plate. The unit can be affixed to a silhouette or target. I doubt you would persuade a squirrel to use them as squibs.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top