Slingshots Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
667 Posts
Hey guys, I haven't been building as much as in the past, but here are three recent builds from the last couple of months.

@MJ's ergo. Pallet wood traditional board cut.

@mattwalt's design. I think he called it the everyshooter? Thick pvc.

@urbanshooter's Snap Jaw Turtle. Homemade hdpe.

cbde91dd849612bc1290b7ab56efc078.jpg
58f5d22fabea936f86067f76189e8e18.jpg
84344514a969b63351420f4259bed277.jpg
80eeb87954db77d885121b3d2db0ef22.jpg


Thanks for the templates guys! All three are great!

Sent from my VS980 4G using Tapatalk
 

·
SLING-N-SHOT
Joined
·
4,444 Posts
Hey guys, I haven't been building as much as in the past, but here are three recent builds from the last couple of months.

@MJ's ergo. Pallet wood traditional board cut.

@mattwalt's design. I think he called it the everyshooter? Thick pvc.

@urbanshooter's Snap Jaw Turtle. Homemade hdpe.

cbde91dd849612bc1290b7ab56efc078.jpg
58f5d22fabea936f86067f76189e8e18.jpg
84344514a969b63351420f4259bed277.jpg
80eeb87954db77d885121b3d2db0ef22.jpg


Thanks for the templates guys! All three are great!

Sent from my VS980 4G using Tapatalk
Very nice shooters, I made one from a Maple branch using MJ's template.....love it and looks almost identical to yours.
Wood Art Artifact Metal Font

Artifact Wood Fawn Font Metal


Sent from my iPhone using Tapatalk
 

Attachments

·
Registered
Joined
·
4,219 Posts

·
Registered
Joined
·
667 Posts
Discussion Starter · #12 ·
Very nice, Port!! Did you laminate the pallet board one?
I've got some this Oak salvaged from a pallet, may have to get sanding and glue a couple together.
Good job on all of em!!
I didn't, since this is a larger frame with some good meat on the forks. It's about 5/8" thick and I'm going to keep light bands on it just to be safe. Thanks!
 
1 - 13 of 13 Posts
Top